Cleaner for removing organic substances ServFaces
Our hydroplastic cleaner for the removal of biological waste is a biodegradable and degradable product for cleaning and degreasing (removing oil contamination) of metal and mineral surfaces.
Aliphatic hydrocarbons (diesel fuel, motor oils, etc.) It is easy to decompose with the help of a biological waste purifier. A biodegradable waste disposal cleaner can be used as an auxiliary for the accelerated decomposition of aliphatic hydrocarbons in reservoirs and wastewater treatment systems (also for cleaning effluents from light-liquid separators).
Bionic waste purifier has the property of destroying molecular chains of hydrocarbons. This turns the hydrocarbon into a protein.
Silicone impurities, which can not be removed from the surface by other cleaners, are easily removed using a Bionic Disposal Cleaner.
Bionic-Disposal-Cleaner is an environmentally friendly alternative to degreasing coated surfaces. Thus, the use of organic solvents that pollute the environment is excluded.
Expensive removal and harmful emissions are a thing of the past.
In addition, oil-covered mineral surfaces, for example, Concrete, asphalt and the like. Can be cleaned with Bionic Disposal Cleaner in an environmentally friendly way.
Application features at a glance
• Cleaning and removal of contaminants with diesel and waste oil
• Cleaning the engine compartment – replacing the cold detergent
• Cleaning and dismantling of diesel oil – Remains of crude oil in the inside of the tank and pipelines
• For degreasing the coating surfaces
• Removal of impurities with silicone
• cleaning of historical buildings, monuments, sculptures from mineral substances, for example. sandstone
An interesting field of application for the purifier of biological waste: historical buildings, monuments, sculptures, etc.
In the recovery there is a big problem that soot particles are caused by house fires and the burning of diesel fuel in porous natural stones.
Cleaning the shaded facades of the house is impossible, since the particles of dissolved carbon are statically loaded and form a solid bond in the voids (pores) of the mineral surface. If these particles combine with water, a chemical reaction is created, the so-called crust of sandstone. This leads to corrosion of the stone. The biological purifier clears these statically charged particles, they can simply be rinsed with hot water.
The biological purifier can be diluted with water to a ratio of 1: 3 depending on the degree of contamination. Exposure time should be from 1 to 3 hours. Then rinse with clean water. For this purpose, it is recommended to clean the high-pressure cleaner with a temperature of about 70 ° C. Cleaning can also be carried out by immersion bath.
Dilute the solution in proportion to water 1: 3 (hot water); Allow to work for 1-3 hours and spray with clean water; If necessary, repeat the procedure.
Fill the linear system with a solution in a ratio of 1: 2, let it run for about 1 to 3 hours, drain the solution and rinse with clean water.
As this product automatically degrades after about 9 days, expensive disposal is avoided.
Quantity of application: from 15 ml to 100 ml / m²
Operating temperature: + 5 ° C to + 35 ° C
Storage and shelf life: at least 12 months at room temperature in tightly closed original containers.
Protect from direct sunlight and frost
Storage temperature: + 10 ° C to + 25 ° C